Slotted bridge is a common cable support system that is widely used in buildings and industrial facilities. Correct installation of channel bridge is very important, not only to ensure the safe operation of cables, but also to improve the reliability of the entire electrical system. Below are some specifications and rules about the installation of channelized bridges.

First of all, proper planning and design should be carried out before installing the channel bridge. When determining the location and length of the bridge, the number, size and weight of the cables, as well as the special requirements of the environment in which they are located, need to be taken into account. Reasonable planning can avoid subsequent problems and unnecessary troubles.

Secondly, when installing the channel bridge, you need to ensure that it is firmly fixed. The overhanging length of the bridge should not exceed the specified limit value to avoid deformation or fracture of the bridge due to excessive overhanging. At the same time, the support points of the bridge need to be firm and reliable to bear the weight of the cables. Appropriate fixings and bolts should be used during installation, and proper installation should be carried out in accordance with the manufacturer’s instructions.

Slotted Bridge

In addition, the way in which channel bridges are connected also requires attention. The connection of neighboring bridges should be firm and reliable to avoid loosening or detachment. Connections should be selected in accordance with specifications and properly installed. Appropriate bolts and nuts should be used at the connections and properly tightened.

Finally, after the installation is completed, necessary inspections and tests need to be carried out. Check whether the bridge is installed vertically and horizontally, and check whether its surface is flat. Test the installation of the cables to make sure they are not overstretched or bent. If necessary, load tests can also be conducted to verify the load-bearing capacity of the bridge.

In conclusion, the installation of channel bridge is a complex and important process. Following codes and rules, proper planning, correct installation and regular inspections can ensure the proper operation of the channelized bridge and the reliability of the cable system. If you need to install channel bridge, please be sure to refer to relevant codes and professional advice to ensure safety and reliability.

This article is edited by China Steel Pipe. If you have forwarded it, please indicate the website address